How to Choose the Best Man Lift for an Aerial Lift?

Contractors frequently operate at heights, whether it’s for painting, ceiling work, or finishing an HVAC system. Lifting should always be done as safely as possible, including for humans and goods. This can be complicated due to the wide range of man lifts and aerial platforms. How do you choose between platform manlifts and articulating boom lifts? Which aerial lift or man lift is ideal for your job and you?

Here are a few factors to consider when choosing whether to rent an aerial lift or a man lift for your job.

Is it inside or outside?

It would be best to ask where you need the lift to go. You might avoid employing certain lift types if most of your job is outdoors. Scissor lifts, for instance, are primarily rated for usage inside. They often have a lesser wind speed capacity and aren’t as stable on uneven ground.

On the other side, rough terrain scissor lifts are a subclass of scissor lifts that have been created especially for outdoor use when natural up-and-down movement is required. The main distinction between these two kinds of scissor lifts is that complex terrain lifts include stabilizers, four-wheel drive, and reinforced tires.

Although not explicitly designed for outdoor use like the rough terrain lift, boom lifts, including articulating, telescopic, and towable boom lifts, are acceptable.

Consideration of Fuel

Because of fuel, you should decide first and foremost whether you’ll use an indoor or outdoor elevator. Numerous telescopic boom lifts use dual-fuel or diesel as their fuel. Operating these gas-powered devices in enclosed spaces with little airflow is risky.

If you plan to work inside, ask particularly about electric elevators. In addition to making the operator and other workers safer, doing this will lessen the possibility of a fire or blast inside the building.

What kind of work am I performing?

There are two main categories of lifts: scissor lifts and boom lifts.

In contrast to boom lifts, which offer a forward reach, scissor lifts work in an up-down posture. A small amount of turning ability is also provided by articulating boom lifts, enabling them to reach up and over beams, roofs, other obstructions, and around corners.

For painting and ceiling work, scissor lifts are frequently used when the lift can get right up in the area that needs the work. Since the base is the same size as the platform, they may fit in compact spaces and don’t require as much room to maneuver as boom lifts, which have a little neck on the body.

How high a lift do I need to use?

When renting a manlift, height and reach are crucial factors. Range specifically refers to the amount of horizontal area a telescopic boom lift can provide. This must be kept in mind for the task at hand and the place where the lift must enter and move in.

All lifts should be able to turn as needed and fit through doorways without running into any obstructions.

That which am I lifting?

There are two causes why this query is significant. The platform’s size comes first.

Larger objects than the platform itself cannot be lifted. The platform must be big enough to hold the complete piece or material, such as drywall or a light fixture, if you intend to raise it.

Weight is the second consideration in this inquiry. The machine’s maximum weight capacity varies according to its size and reach. Before making up your mind to use a particular lift form, please consider the material, its weight, and its reach.

If you have any questions concerning maximum weight and reach capacities, the DOZR team is available to help. They can also point you toward your project’s ideal man lift rental.

Keep in mind that size isn’t always better.

Going bigger with lifts is sometimes preferable because you can choose not to extend it or move the base farther away. In actuality, the reverse is true. A lift that is too big for the work will also likely be hefty and may be more challenging to handle in the available space. More substantial lifts may run into wires, beams, columns, or other obstructions.

On the other side, getting a lift that is too tiny can entail pushing the equipment over its breaking point. Accidents are almost always the result of stretching too far or loading materials too heavily.

Taking accurate measurements may take more time, but it is worth it for the project’s and the contractors’ safety.

purchasing a man lift

For particular projects or jobs, lifts are typically used for shorter times. For instance, large boom lifts can cost upwards of $50,000. Additionally, you can be limited to a single device that is ineffective for all projects.

Share this post

Share on facebook
Share on google
Share on twitter
Share on linkedin
Share on pinterest
Share on print
Share on email
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Recent Posts

Newsletter

Subscribe for our monthly newsletter to stay updated

Gallery

Related Post

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut